CABLINE-UX II Product Image
Slim design suitable for through-hole solution, narrow pitch (0.25 mm), Right angle vertical mating type micro-coaxial connector

    Suitable for small connector spaces

    Slim plug design, suitable for through-hinge assemblies

    Multi-point ground contact design for EMC protection

Contact Pitch (mm):
0.25 mm
Height:
1.1 Max
Available Pin Count:
30 34 40 50
Micro-Coaxial Cable (AWG):
#44 #46
Discrete Cable (AWG):
#39 #40 #42 #44 #46
Mating Direction:
Vertical

Downloads


Suitable for small connector spaces

CABLINE®-UX II 40p size is smaller than a one-cent coin.

CABLINE-UX II_FAB1-1.jpg CABLINE-UX II_FAB1-2.jpg

Flexible micro-coaxial cable harness is
suitable for small applications with hinge design.


 

Slim plug design, suitable for through-hinge assemblies

Simulation Reference Example:    
UX II 40p plug with 0.24 mm cable outer diameter harness can go through 2.66 mm inner diameter.

CABLINE-UX II_FAB2-1.jpg
φ2.66 mm
CABLINE-UX II_FAB2-2.jpg
small hinge
CABLINE-UX II_FAB2-3.jpg
narrow tube

Hinge Component Pass-Through with CABLINE® Harness Assemblies

 

Multi-point ground contact design for EMC protection

 

CABLINE-UX_II_FAB3-1_ALL

                            View From Topside

 ​ UAII_Fab3-3  Soldered contacts  
UAII_Fab3-4 Mechanical contacts

CABLINE-UX_II_FAB3-2_ALL CABLINE-UX_II_FAB3-3_ALL CABLINE-UX_II_FAB3-4 _ALL
Wire Shield
 to 
Ground Bar
FAB3 Ground Bar
 to 
Plug Shell
​​FAB3 Plug Shell
 to 
Receptacle Shell
FAB3        Receptacle Shell 
                  to
                 PCB

 


 

 
Contact pitch
0.25 mm
Height
1.1 Max
Depth
2.4 mm
Width Formula
4.1+(0.25*?p) mm
Pin count
30 34 40 50
Current rating
Contact Material: Phosphor Bronze (Plug : 20531-0**T-02, Receptacle: 20533-0**E) 0.15A AC/DC [AWG #44] per contact 0.10A AC/DC [AWG #46] per contact Contact Material: Corson Allow (Plug: 20531-0**T-12, Receptacle: 20533-0**E-01) 0.19A AC/DC [AWG #44] per contact 0.14A AC/DC [AWG #46] per contact
Applicable Standards (Reference Only)
USB 3.1 Gen 1 (5 Gbps) V-By-One HS 1.4 (4 Gbps) eDP (2.7 Gbps) MiPi standards
Full shielding (ZenShield®)
No

RECOMMENDED PART NUMBERS

Please contact us if you cannot find the needed part number(s) from the list below.

 

DIAGRAMS_CABLINE-UX_II

 

CABLINE-UX II RECOMMENDED PART NUMBERS

Part Number Description Part Number Weight (mg)
CABLINE-UX II plug cable assembly 30pin 20531-030T-02-1 29.2
CABLINE-UX II plug cable assembly 34pin 20531-034T-02-1 32.1
CABLINE-UX II plug cable assembly 40pin 20531-040T-02-1 37
CABLINE-UX II plug cable assembly 50pin 20531-050T-02-1 43.5
CABLINE-UX II plug housing 30pin 20532-030T-02-1 17.42
CABLINE-UX II plug housing 34pin 20532-034T-02-1 19.2
CABLINE-UX II plug housing 40pin 20532-040T-02-1 22.4
CABLINE-UX II plug housing 50pin 20532-050T-02-1 25.5
CABLINE-UX II plug metal cover 30pin 2799-0301 11.78
CABLINE-UX II plug metal cover 34pin 2799-0341 12.9
CABLINE-UX II plug metal cover 40pin 2799-0401 14.6
CABLINE-UX II plug metal cover 50pin 2799-0501 18
CABLINE-UX II receptacle 30pin 20533-230E 49.3
CABLINE-UX II receptacle 34pin 20533-234E 52.18
CABLINE-UX II receptacle 40pin 20533-240E 56.34
CABLINE-UX II receptacle 50pin 20533-250E 66.42

 

SAMPLE HARNESS FOR EVALUATION

Part Number Description Part Number
CABLINE-UX II harness 30pin micro-coaxial 44AWG L=200mm 82070-100B-02-D

SI Test Board with 2.92mm Adapter

Part Number Description Part Number
SI Test Board for CABLINE-UX II (type-A) 30pin 91576-030B-001
SI Test Board for CABLINE-UX II (type-A) 34pin 91576-034B-001
SI Test Board for CABLINE-UX II (type-A) 40pin 91576-040B-001
SI Test Board for CABLINE-UX II (type-A) 50pin 91576-050B-001
SI Test Board for CABLINE-UX II (type-B) 30pin 91577-030B-001
SI Test Board for CABLINE-UX II (type-B) 34pin 91577-034B-001
SI Test Board for CABLINE-UX II (type-B) 40pin 91577-040B-001
SI Test Board for CABLINE-UX II (type-B) 50pin 91577-050B-001
Part Number Description Part Number
CABLINE-UA II/UX II hand tool one-side-extraction 90460-001