CABLINE-UM
Fully-shielded and multi-point ground, Mechanical lock, High-data-rate transfer (40 Gbps/lane PAM3), 0.4 mm pitch, Right angle vertical mating type micro-coaxial connector

    ZenShield® fully-shielded with multi-point grounds is ideal for EMC solutions

    Lock cover and 0.65 mm min. wiping length provides high contact reliability

    Ideal for high-data-rate transfer up to 40 Gbps/lane PAM3

*Refer to the "How to mate and unmate" video for handling.

Contact Pitch (mm):
0.4 mm
Height:
2.35 Max
Available Pin Count:
30 40 50 60
Micro-Coaxial Cable (AWG):
#38 #40 #42 #44 #46
Twinax Cable (AWG):
#40 #42
Discrete Cable (AWG):
#34 #36 #38 #39 #40 #42 #44 #46
Mating Direction:
Vertical

Downloads


ZenShield® fully-shielded with multi-point grounds is ideal for EMC solutions

    General Connector ZenShield® Connector
CABLINE-UM_FAB1-1.jpg
View From Underside 
 
CABLINE-UM FAB1-2 ALL
CABLINE-UM FAB1-3 ALL
CABLINE-UM_FAB1-2.jpgGround SMT points
 
1. Wi-Fi Antenna  
2. High-data-rate signal transfer
 
 
ZenShield® connector allow closer placement to antenna or radiating structures

 

Lock cover and 0.65 mm min. wiping length provides high contact reliability

With Lock Cover---enhanced mating retention force Wiping length : 0.65 mm min.
  CABLINE-UM FAB2-2 ALL
CABLINE-UM FAB2-1 ALL
 

 


 

Ideal for high-data-rate transfer up to 40 Gbps/lane PAM3

Measurement results

Connector
: CABLINE-UM 40P
Cable : Micro-coaxial cable 
AWG #40, 45ohm , Length : 100 mm
Pin Assignment : GSSGSSG

CABLINE-UM FAB3 ALL

 

 
Contact pitch
0.4 mm
Height
2.35 Max
Depth
5 mm
Width Formula
With Lock Cover : 5.0 + (0.4 * ?p); Without Lock Cover : 4.2 + (0.4 * ?p) mm
Pin count
30 40 50 60
Current rating
0.1A AC/DC [AWG #44] Per Contact 0.24A AC/DC [AWG #42] Per Contact 0.3A AC/DC [AWG #40] Per Contact 0.5A AC/DC [AWG #38] Per Contact 0.8A AC/DC [AWG #36] Per Contact 1.0A AC/DC [AWG #34] Per Contact
Applicable Standards (Reference Only)
USB4 (20 Gbps/lane) USB 3.1 Gen 2 (10 Gbps) USB 3.1 Gen 1 (5 Gbps) eDP HBR 3 (8.1 Gbps) eDP HBR 2 (5.4 Gbps) eDP (2.7 Gbps) HDMI 2.0 (6 Gbps) V-By-One HS 1.4 (4 Gbps) MiPi standards
Full shielding (ZenShield®)
Yes

RECOMMENDED PART NUMBERS

Please contact us if you cannot find the needed part number(s) from the list below.

 

DIAGRAMS_CABLINE-UM

 

CABLINE-UM RECOMMENDED PART NUMBERS

Part Number Description Part Number Weight (mg)
CABLINE-UM plug housing 40pin 20878-040T-11 122.680
CABLINE-UM plug housing 60pin 20878-060T-11 178.788
CABLINE-UM receptacle 30pin 20879-030E-02 116.780
CABLINE-UM receptacle 30pin 20879-030E-11  
CABLINE-UM receptacle 40pin 20879-040E-02 146.430
CABLINE-UM receptacle 40pin 20879-040E-11 146.430
CABLINE-UM receptacle 50pin 20879-050E-02  
CABLINE-UM receptacle 50pin 20879-050E-11 174.664
CABLINE-UM receptacle 60pin 20879-060E-02 207.018
CABLINE-UM receptacle 60pin 20879-060E-11 207.018
CABLINE-UM cable assembly lock cover 30pin 21074-030E-01 -
CABLINE-UM cable assembly lock cover 40pin 21074-040E-01 -
CABLINE-UM cable assembly lock cover 50pin 21074-050E-01 -
CABLINE-UM cable assembly lock cover 60pin 21074-060E-01 -
CABLINE-UM plug housing 30pin 21075-030T-01 100.590
CABLINE-UM plug housing 40pin 21075-040T-01 122.680
CABLINE-UM plug housing 50pin 21075-050T-01 -
CABLINE-UM plug housing 60pin 21075-060T-01 178.788
CABLINE-UM receptacle 30pin 21076-030E-01 116.780
CABLINE-UM receptacle 40pin 21076-040E-01 146.430
CABLINE-UM receptacle 50pin 21076-050E-01 174.664
CABLINE-UM receptacle 60pin 21076-060E-01 207.018

 

SAMPLE HARNESS FOR EVALUATION

Part Number Description Part Number Weight (mg)
CABLINE-UM harness 30pin micro-coaxial 40AWG L=100mm 82187-100B-02-D -
CABLINE-UM harness 30pin micro-coaxial 40AWG L=200mm 81465-100B-02-D 2687.7
CABLINE-UM harness 30pin micro-coaxial 40AWG L=300mm 82286-100B-02-D -
CABLINE-UM harness 40pin micro-coaxial 40AWG L=200mm 81466-100B-02-D 3524.1
CABLINE-UM harness 50pin micro-coaxial 40AWG L=200mm 82285-100B-02-D 4865
CABLINE-UM harness 60pin micro-coaxial 40AWG L=200mm 82147-100B-02-D -
CABLINE-UM harness 40pin micro-coaxial 40AWG L=100mm 1-N 82451-100B-02-D -
CABLINE-UM harness 40pin micro-coaxial 40AWG L=300mm 1-N 82452-100B-02-D -

 

Other Part Numbers

CABLINE-UM OTHER PART NUMBERS

Part Number Description Part Number Weight (mg)
CABLINE-UM plug housing 40pin 20878-040T-11 122.680
CABLINE-UM plug housing 60pin 20878-060T-11 178.788
CABLINE-UM receptacle 30pin 20879-030E-02 116.780
CABLINE-UM receptacle 30pin 20879-030E-11 - 
CABLINE-UM receptacle 40pin 20879-040E-02 146.430
CABLINE-UM receptacle 40pin 20879-040E-11 146.430
CABLINE-UM receptacle 50pin 20879-050E-02 - 
CABLINE-UM receptacle 50pin 20879-050E-11 174.664
CABLINE-UM receptacle 60pin 20879-060E-02 207.018
CABLINE-UM receptacle 60pin 20879-060E-11 207.018
CABLINE-UM cable assembly lock cover 30pin 21074-030E-01 -
CABLINE-UM cable assembly lock cover 40pin 21074-040E-01 -
CABLINE-UM cable assembly lock cover 50pin 21074-050E-01 -
CABLINE-UM cable assembly lock cover 60pin 21074-060E-01 -
CABLINE-UM plug housing 30pin 21075-030T-01 100.590
CABLINE-UM plug housing 40pin 21075-040T-01 122.680
CABLINE-UM plug housing 50pin 21075-050T-01 -
CABLINE-UM plug housing 60pin 21075-060T-01 178.788
CABLINE-UM receptacle 30pin 21076-030E-01 116.780
CABLINE-UM receptacle 40pin 21076-040E-01 146.430
CABLINE-UM receptacle 50pin 21076-050E-01 174.664
CABLINE-UM receptacle 60pin 21076-060E-01 207.018
CABLINE-UM plug shell A 30pin 3860-0301 64.810
CABLINE-UM plug shell A 40pin 3860-0401 84.100
CABLINE-UM plug shell A 50pin 3860-0501 -
CABLINE-UM plug shell A 60pin 3860-0601 122.075
CABLINE-UM plug lock cover 30pin 3861-0301 77.880
CABLINE-UM plug lock cover 40pin 3861-0401 88.140
CABLINE-UM plug lock cover 50pin 3861-0501 -
CABLINE-UM plug lock cover 60pin 3861-0601 112.876

SI Test Board with 2.92mm Adapter

Part Number Description Part Number Weight (mg)
SI Test Board for CABLINE-UM 30pin 91580-030B-001 84028.6
SI Test Board for CABLINE-UM 40pin 91580-040B-001 84084
SI Test Board for CABLINE-UM 60pin 91580-060B-001 84202