CABLINE®-CX II With Cover

CABLINE-CX II with Cover Product Image
Narrow pitch (0.25 mm pitch), Low mating height (Height = 1.00 mm max.), EMI shielding cover and multi-point ground with mechanical lock, Horizontal mating type micro-coaxial connector

    Suitable for Small Spaces

    EMI Shielding Mechanical Locking Cover Prevents EMI Leakage

    EMI Shielding and Multi-Point Ground Design

Contact Pitch (mm):
0.25 mm
Height:
1 Max
Available Pin Count:
40
Micro-Coaxial Cable (AWG):
#44 #46
Discrete Cable (AWG):
#39 #40 #42 #44 #46
Mating Direction:
Horizontal

Downloads


Suitable for Small Spaces

CABLINE-CX II 40p size is smaller than a one-cent coin.
Mating Height: 1.0 mm maximum                                                             Hinge Component Pass-Through with CABLINE® Harness Assemblies

CABLINE-CX II_FAB1-1_ALL CABLINE-UX II_FAB1-2.jpg

Flexible micro-coaxial cable harness is
suitable for applications with hinge design.

EMI Shielding Mechanical Locking Cover Prevents EMI Leakage

CABLINE-CX II_FAB2-1Mate 
CABLINE-CX II_FAB2-2 Locked
CABLINE-CX II_FAB2-3
EMI Simulation (2.4 GHz)
         
CABLINE-CX II_FAB2-4
                                        Without EMI Cover                                                             With EMI Cover






                                                     


 

EMI Shielding and Multi-Point Ground Design

 

CABLINE-CX II_FAB3-1   
View From Underside
    
CABLINE-CX II_FAB3-2

UAII_Fab3-3  Soldered contacts   
UAII_Fab3-4 Mechanical contacts

  

 
Wire Shield
 to 
Ground Bar
FAB3 Ground Bar
 to 
Plug Shell
​​FAB3 Plug Shell
 to 
Cover Shell
FAB3 Cover Shell to
Receptacle Shell & PCB

 


 

 
Contact pitch
0.25 mm
Height
1 Max
Depth
5.21 mm
Width Formula
16.45 mm
Pin count
40
Current rating
0.10A AC/DC [AWG #46] per contact/up to 40 contacts 0.15A AC/DC [AWG #44] per contact/up to 40 contacts 0.30A AC/DC [AWG #39] per contact/up to 40 contacts
Applicable Standards (Reference Only)
USB 3.1 Gen 1 (5 Gbps) V-By-One HS 1.4 (4 Gbps) eDP (2.7 Gbps) MiPi standards
Full shielding (ZenShield®)
No

RECOMMENDED PART NUMBERS

Please contact us if you cannot find the needed part number(s) from the list below.
 

 

DIAGRAMS_CABLINE-CX_II_WITH_COVER

CABLINE-CX II With Cover RECOMMENDED PART NUMBERS

Part Number Description Part Number Weight (mg)
CABLINE-CX II with cover plug cable assembly 40pin 20977-040T-01 139.28
CABLINE-CX II plug housing 40pin 20974-040T-01 32.53
CABLINE-CX II plug shell 40pin 3655-0401 19.35
CABLINE-CX II with cover plug lock bar assembly 40pin 20975-040T-01 87.4
CABLINE-CX II receptacle 40pin 20976-040E-01 78.353
SI Test Board with 2.92mm Adapter Part Number
SI Test Board for CABLINE-CX II (type-A) 40pin 91583-040B-001
SI Test Board for CABLINE-CX II (type-B) 40pin 91584-040B-001