CABLINE-CBL Product Image
Suitable for high-data-rate transfer (20 Gbps/lane), Low mating height (Height = 0.975 mm max. ), Mechanical lock with shielding and multi-point ground, 0.4 mm pitch, Horizontal mating type Micro-coaxial connector

    High-data-rate transfer, ideal for 20 Gbps/lane applications

    Mechanical locking bar prevents incomplete mating and back-out/un-mating

    EMI shielding and multi-point ground design

Contact Pitch:
0.4 (mm)
Mating Direction:
Horizontal
Height:
0.98 max. (mm)
Available Pin Count:
30 40
Micro-Coaxial Cable:
AWG 40 AWG 42 AWG 44 AWG 46
Discrete Cable:
AWG 36 AWG 38 AWG 39 AWG 40 AWG 42 AWG 44 AWG 46
Current rating:
0.1A AC/DC [AWG #44] per contact 0.24A AC/DC [AWG #42] per contact 0.3A AC/DC [AWG #40] per contact 0.8A AC/DC {AWG #36] per contact

Downloads


High-data-rate transfer, ideal for 20 Gbps/lane applications

Measurement results

Connector
: CABLINE-CBL 40P
Cable : Micro-coaxial cable 
AWG #40, 45ohm , Length : 100mm
Pin Assignment : GSSGSSG

FAB1

 

Mechanical locking bar prevents incomplete mating and back-out/un-mating

FAB2-1Mate 
FAB2-2 Locked
FAB2-3
                                                                             Mechanical locking bar only locks when plug is fully mated to receptacle. 
InterfaceFAB2-4              
          incomplete mating
FAB2-5
complete mating

 

EMI shielding and multi-point ground design

      UAII_Fab3-3  Soldered contacts  
UAII_Fab3-4 Mechanical contacts

 

FAB3-1    View From Underside
FAB3-2Cross-section

FAB3-3   View From side

 
Wire Shield
 to 
Ground Bar
FAB3 Ground Bar
 to 
Plug Shell
​​FAB3 Plug Shell
 to 
Cover Shell
FAB3 Cover Shell 
to
Receptacle Shell & PCB

 


 

 
Transmission Speed(Reference Only) 5 Gbps/Lane NRZ
Contact Pitch
0.4 (mm)
Mating Direction
Horizontal
Height
0.98 max. (mm)
Available Pin Counts
30 40
Depth
5.45 mm
Width Formula
6.44+(0.4*?p)
Micro-Coaxial Cable
AWG 40 AWG 42 AWG 44 AWG 46
Discrete Cable
AWG 36 AWG 38 AWG 39 AWG 40 AWG 42 AWG 44 AWG 46
Shielded FPC / FFC
No
Current rating
0.1A AC/DC [AWG #44] per contact 0.24A AC/DC [AWG #42] per contact 0.3A AC/DC [AWG #40] per contact 0.8A AC/DC {AWG #36] per contact
Applicable Standards (Reference Only)
USB3.1 Gen1 (5 Gbps/Lane) V-By-One HS 1.4 (4 Gbps/Lane) eDP (2.7 Gbps/Lane) MiPi standards
Full EMI Shielding (ZenShield®)
No
Mechanical lock
Yes

RECOMMENDED PART NUMBERS

Please contact us if you cannot find the needed part number(s) from the list below.

 

DIAGRAMS_CABLINE-CBL

 

CABLINE-CBL RECOMMENDED PART NUMBERS

Part Number Description Part Number Weight (mg)
CABLINE-CBL plug cable assembly 40pin 20472-040T-10R -
CABLINE-CBL plug housing 30pin 20473-030T-10 54.78
CABLINE-CBL plug housing 40pin 20473-040T-10 69.7
CABLINE-CBL plug shell A 30pin 2618-0301 36.9
CABLINE-CBL plug shell A 40pin 2618-0401 46.1
CABLINE-CBL plug latch bar 30pin 2619-0300 40.02
CABLINE-CBL plug latch bar 40pin 2619-0400 43.7
CABLINE-CBL receptacle 30pin 20474-030E-12 100.8
CABLINE-CBL receptacle 40pin 20474-040E-12 118.4