Connectors Home

New Product Release: I-PEX released new 0.9 mm max. low profile CABLINE^®-CAL IIF FPC connection connector (2025/Sep/12)

I-PEX CABLINE^® series has been well-received for their compact size, high-speed transmission, and EMI countermeasures. Recently, I-PEX released the CABLINE^®-CAL IIF, which is 0.4 mm pitch, 0.9 mm max. mating height, horizontally mated, ZenShield^®, high-speed transmission (32 Gbps/lane) connector for FPC connection.

How to operate CABLINE^®-CAL IIF / Micro-coaxial connector

How to mate and unmate the CABLINE^®-CAL IIF / Micro-Coaxial Cable Connectors.

Connectors Solutions Enabling the Internet of Medical Things (IoMT) in Healthcare 4.0

The Internet of Medical Things (IoMT) is transforming how healthcare is delivered. IoT in modern healthcare relies not just on innovative sensors but on the connectivity that ties everything together. By combining smart networking with purpose-built connector solutions (like MHF^® for wireless links and MINIFLEX^® for compact internal connections), medical devices can seamlessly communicate.

Connector Solutions for Data Transmission & High-Speed Solutions in Healthcare 4.0

Healthcare 4.0 devices generate an unprecedented volume of data – from high-resolution medical images and streaming video to continuous sensor readings. Efficient data transmission is therefore paramount to make this data useful. I-PEX CABLINE^®, NOVASTACK^®, MHF^® connector series contribute to fast and secure data transmission in medical devices.

Data Transmission & High-Speed Connectivity

CABLINE^®-CA IIP PLUS : Paddle Card Technology

Paddle Card Technology Offers high signal integrity by using a paddle card in the cable plug. Data rates and cross talk performance of existing CABLINE^® series products are optimized even further.

Additional series line-up: 3, 8, 9 and 10 pins for IARPB^® VERTICAL (2025/May/29)

I-PEX has released additional pin counts for IARPB^® VERTICAL, vibration resistant, one-piece, vertical type board-in connector.

How to operate CABLINE^®-CA II PLUS / Micro-coaxial connector

How to mate and unmate the CABLINE^®-CA II PLUS / Micro-Coaxial Cable Connectors.

Additional series line-up: 50 pin for CABLINE^®-UM (2025/Mar/26)

I-PEX has released additional pin counts for CABLINE^®-UM, fully-shielded with multi-point grounds, mechanical lock, high-data-rate transfer (40 Gbps/lane PAM3), 0.4 mm pitch, right angle vertical mating type micro-coaxial connector.

Additional series line-up: 16 pin for NOVASTACK^® 35-P (2025/Mar/11)

I-PEX has released additional pin counts for NOVASTACK^® 35-P, a robust connector with hold-down that can also be used as a power contact capable of transmitting 2.2A/pin.

Pinout Selection and PCB Breakout Strategies for CABLINE^®-CX II, UX II, and UA II Connectors

This white paper introduces the CABLINE^® series connectors, specifically the dual-row connectors CABLINE^®-CX II, CABLINE^®-UX II and CABLINE^®-UA II. It focuses and discusses on the different pin-out selection and PCB breakouts to overcome some of the challenges that are presented with dual-row connectors.

WhitePaper pinout selection and PCB breakout strategies for CABLINE

I-PEX's unique countermeasure to potential issues caused by closing actuator without FPC inserted

"Empty-closure", a common occurrence in manufacturing and assembly, is the operation of an actuator without inserting an FPC into the connector. It can cause connector damage or incomplete mating when the FPC is subsequently inserted. This white paper introduces the "empty-closure" issue by using I-PEX's MINIFLEX^® series as an example, and how it is addressed, as well as the design know-how gained through analysis and calculation to ensure that the connector will function even if an empty closure occurs.

New Product Release：CABLINE^®-CA IIP PLUS harness for SmartNICs, DPUs, and next-generation telecommunications equipment(2024/Nov/19)

I-PEX has released CABLINE^®-CA IIP PLUS, which is compatible with both twinax and micro-coaxial cables, adding to its existing CABLINE^® series of connectors. CABLINE^®-CA IIP PLUS is optimized for high-speed 64 Gbps/lane PAM4 internal connections, featuring full 360° EMC shielding for noise immunity.

Product Filter

Search by Application

News & Updates