MHF® I LK
業內創舉-鎖扣解決方案計，適用於所有 MHF®I 類型的母座，支持可達9 GHz, 組合高度最大為 2.9 mm
連續衝擊和震動的理想解決方案
獲得專利的 MHF®I 公座鎖扣結構
可匹配所有 MHF®I 母座
Height:
2.90 Max
頻率範圍:
Up to 9 GHz
極細同軸線(AWG):
#30 (O.D. 1.80 mm)
#30 (O.D. 1.37 mm)
#32 (O.D. 1.32 mm)
#32 (O.D. 1.13 mm)
#36 (O.D. 0.81 mm)
下載
連續衝擊和震動的理想解決方案
獲得專利的 MHF®I 公座鎖扣結構
可匹配所有 MHF®I 母座
| Product Type |
Coaxial RF Connector
|
| Height |
2.90 Max
|
| Micro-Coaxial Cable (AWG) |
#30 (O.D. 1.80 mm)
#30 (O.D. 1.37 mm)
#32 (O.D. 1.32 mm)
#32 (O.D. 1.13 mm)
#36 (O.D. 0.81 mm)
|
| Frequency range |
Up to 9 GHz
|
| V.S.W.R. |
VSWR (DC~3GHz) 1.3
VSWR (3GHz~6GHz) 1.5
|
| Applicable Standards (Reference Only) |
5G sub-6
IEEE802.11 b
IEEE802.11 a
IEEE802.11 g
Wi-Fi 4
Wi-Fi 5
Wi-Fi 6
LTE /LTE-Advanced
LPWA
Bluetooth
GPS
|
| Full shielding (ZenShield®) |
No
|
| Mechanical lock |
Yes
|
推薦料號
若清單中查詢不到您要找的料號，請使用調查表詢問。
*MHF XX僅以MHF XX 線束的形式銷售
請指定線束組件規格（單端或雙端、電纜尺寸、長度、顏色）。
MHF I LK RECOMMENDED PART NUMBERS
| Part Number Description | Part Number |
| MHF I LK harness assembly (Offered as harness only) | See note above* |
| MHF I&II RECEPTACLE | 20279-001E-03 |
SAMPLE HARNESS FOR EVALUATION
| Part Number Description | Harness Length | Part Number |
| MHF I-I CABLE113-1 +LK | 100 mm | 8-23-0118 |
| MHF I-I CABLE113-1 +LK | 200 mm | 8-21-0047 |
| MHF I-I CABLE113-1 +LK | 500 mm | 8-23-0120 |
| MHF I-I CABLE137-1 +LK | 100 mm | 8-23-0119 |
| MHF I-I CABLE137-1 +LK | 200 mm | 8-21-0049 |
| MHF I-I CABLE137-1 +LK | 500 mm | 8-23-0121 |
其他料號
請注意:此清單可能包含了暫時還沒有可用樣品的?品和不再銷售的型號。
如?有新的詢價，請參考上述推薦的料號。
OTHER MHF I LK PART NUMBERS
| Part Number Description | Part Number |
| MHF I&II RECEPTACLE (2.5K pcs/reel, Paper reel) | 20279-001E-01 |
| MHF I&II RECEPTACLE (10K pcs/reel, Plastic reel) | 20279-001E-05 |
| MHF I&II RECEPTACLE (4 pads type) | 20441-001E-01 |
| SMA Adapter | Usage (Durability Cycles) | Part Number |
| Plug | Electrical Performance (3K) | 90193-001 |
| Voltage Check (10K) | 90194-001 | |
| Receptacle | Electrical Performance (500) | 90193-002 |
| High Cycle Normal (10k) | 90539-001 | |
| High Cycle Narrow Pitch Wire (100) | 90577-0100 (100mm) | |
| 90577-0350 (350mm) | ||
| High Cycle Narrow Pitch Probe (10K) | 90575-0001 | |
| High Cycle Detachable Base (200K) | 90684-0001 | |
| High Cycle Detachable Probe (10K) | 90416-001 | |
| Hand Tool | Part Number | |
| Unmating Tool | 91026-0001 | |
